Máquinas usadas: Máquinas para trabalhar metais

Technical data:
Travel paths
Longitudinal travel / X-axis 3200 mm
Cross travel / Y-axis 3400 mm
Vertical travel / Z-axis 1200 mm

Table clamping area 3000 x 2400 ...

Saw blade diameter: approx. 300mm, control: APS Elektronic. Dimensions X/Y/Z: 800mm/1200mm/1600mm. Including 2 roller conveyors (sheet steel), dimensions X/Z: 4000mm/1000mm. Defective but not ...

Pressing force: 1250kN, bending length: 2550mm, oil volume: 250l, control: DNC 806 PS/K.

Ref.Nr.: INNO26720

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, ...

Control: MSC-501, number of axes: 3, table size X/Y: 1100mm/600mm, max. table load: 1000kg. Travel X/Y/Z: 1000mm/500mm/500mm, rapid traverse X/Y/Z: 3200mm/min, spindle taper: CAT 40, spindle speed: ...

5-axis vertical machining centre manufactured in 2014 with immediate availability. This DMG MORI DMF 360/11 machine offers a rigid table with an integrated rotary axis, a swivel head B-axis, and a ...

This 5-Axis vertical machining centre was manufactured in 2014. The DMG MORI DMF 260/11, equipped with a Heidenhain iTNC 530 HSCI control, boasts a rigid table with an integrated rotary axis, offering ...

5-Axis milling machine manufactured in 2013, the DMG DMU 80 P Duoblock offers precision milling capabilities, ensuring reliability and accuracy while meeting a wide range of manufacturing needs. ...

Control system - Operateur.
The machine is in good technical condion, under power, after agreement is possible to test it.

Details:
Druckleistung: 220 t
Abkantlänge: ...

Details:
Max. Werkstückhöhe: 710 mm
Max. Werkstückdurchmesser: 1250 mm
Aufspanndurchmesser des Drehtisches: 1180 mm
Max. Umfangdrehendurchmesser: 1250 mm

Details:
Drehdurchmesser über Bett: 1260 mm
Spitzenweite: 4000 mm
Max. Werkstückgewicht: kg
Drehdurchmesser über Support: mm
Hauptmotorleistung: kW

Details:
Größte Durchmesser der Biegeröhre: 76 mm
Rohrwandsdicke: 3 mm
Antriebsart bender: Hydraulický
Maschinenabmessungen L x B x H: 7100 x 1200 x 1850 ...

pressure 0050 t
chamfer lenght 2000 mm
distance between columns 1600 mm
throat 400 mm
stroke of the table 100 mm
Control Delem DA58
total power requirement 7 kW

turning diameter 0500 mm
turning length 1500 mm
control 802 C
turning dia. over face-slide 280 mm
spindle bore 82 mm
spindle turning speed range 20- 3000 U/min

sheet width 2040 mm
plate thickness 1,25 mm
pre-bending
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Right and left ...

sheet width 2500 mm
plate thickness 1,75 mm
distance between columns mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m

OSTERBERGER KBA3440/3020 - kombinierte CNC – gesteuerte Abkantpresse / Blechtafelschere - fabrikneu, Baujahr 2024 – superkompakte Maschine mit sehr geringem Platzbedarf, größte Schnittlänge ...

Technische Daten:
Werkzeugaufnahme: B 6 ; 1 - 13
Bohrleistung: 13 mm
Drehzahlbereich: 400 - 2300 1/min
Spindelhub: 75 mm
Größe Fußplatte: 240 x 215 mm

There are 2 lathes available. Oerlikon, year of manufacture: 1980s. Heidenreich & Harbeck, year of manufacture: 1962. On-site inspection is possible.

Ref.Nr.: INNO26707

Grinding range X/Y/Z: 600mm/375mm/375mm, grinding wheel: 300mm/50mm/76.2mm, max. table load: 300kg, table clamping surface X/Y: 900mm/350mm, weight: 3300kg. Including hydraulic system, self-made ...

Sanding path X/Y: 1000mm/500mm, weight: 5000kg. Including coolant pump with tank (approx. 252l), hydraulic system and self-made suction device. Dressing axis (W-broken). Documentation available. ...

Travel X/Y/Z: 500mm/400mm/350mm, distance table-pin nose: min. 250mm/max. 600mm. Work table clamping surface X/Y: 650mm/450mm, max. table load: 500kg, erosion limit load: approx. 300N. Internal ...

Center height over bed/slide: 433mm/267mm, turning diameter over bed/slide: 425mm/267mm, max. turning diameter in the recess: 711mm. Center distance: approx. 2000mm, spindle bore: 76mm, speed: ...

Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm ...

Sanding range X/Y/Z: 450mm/200mm/375mm, distance table-spindle center: 525mm, hydraulic table drive: 2-28m/min. Cross feed: 3mm - 2/3 wheel width, max. cross travel: 185mm, cross travel: 1200 mm/min. ...

Travel X/Y/Z: 630mm/560mm/560mm, tool holder: SK40, max. speed range: 12000rpm, table size X/Y: 1000mm/600mm, groove spacing: 63mm, number of grooves: 9/14H7, max. table load: 500kg, table weight: ...

This 5-axis milling machine was manufactured in 1996. Equipped with an HSK 40E spindle and a swiveling 2-axis milling head, it offers precise machining capabilities. With travel distances of X2000 / ...

The machine is in good technical condition, under power.

Details:
Steuerung Hurco: UltiMax 2.15
Aufspanntischfläche: 1330x480 mm
X Weg: 760 mm
Y Weg: 460 mm

The machine has been completely overhauled. We will send the repair schedule upon request. 12 month warranty.

Schedule of overhaoul works:

Bed Z and stand
preparing ...

The machine is in good technical condition, under power, after agreement is possible to test it. 3D control iTNC 530 HSCI.
Full cab, coolant tank, direct metering systems, chip conveyor.

The machine is in good technical condition and can be tested. Equipment: automatic wheel balancing system, automatic - in process - measuring system.

Details:
Steuerung Siemens: ...

mfg. year 2013

Reference Number:
24019

Year of Manufacture:
04/2013

control:
Fanuc 32-i Model A
manual guide i

max. ...

Profile width CNC axis X: 120 mm
Profile width CNC axis Y: 30 mm
Sanding stroke: Length, infinitely variable W2 0-80 mm
Lehman dividing head EA-407.1A
Basic holder

Basket size: 640 x 470 x 240 mm
Roller conveyor 

Technical details
Type: Cleaning machines
Location: Arrange an inspection appointment
Country of origin: ...

Catalog No. : 7361
Type: MS 248
Producer: STANKO
Made in:
Characteristic:
The grinder is in good condition.

Catalog No. : 7292
Type: FS30
Producer: LINDNER
Made in: GO 1999
Characteristic:
Machine weight: 3900 kg
The grinder is in good condition.

Catalog No. : 7293
Type: FS30
Producer: LINDNER
Made in:
Characteristic:
The grinder is in good condition.

Catalog No. : 7501
Type: PNR 92
Producer: EGO a.s
Made in: 1995
Characteristic:
Number of shelves: 34 pcs
Power input: 5 kW

Machine in good condition, equipped with new NC Genius v1.5 - Italy 2006, under power, can be inspected any time.

Details:
Arbeitsspindeldurchmesser: 100 mm
X Weg: 1130 mm

The machine is fine, but disconnected
Additional filter system 25 μm
Automatic instrument probe
Belt chip ejector
High pressure cooling system up to
21 bar

The machine is in good technical condition and can be tested.

Details:
Steuerung Heidenhain : TNC 530
Arbeitsspindeldurchmesser: 130 mm
X Weg: 3500 mm
Y Weg: 2000 ...

Machine in very good condition, low working hours, can be inspected any time.

Details:
Steuerung MORI SEIKI:
Aufspanntischfläche: 1350 × 600 mm
X Weg: 1050 mm

The machine is in excellent technical condition and can be tested. Controled axes: X1, Z1, X2, Z2.

Details:
Steuerung NCT: 201
Max. Werkstückdurchmesser: 2500 mm

Catalog No. : 7462
Type: G130
Producer: Göckel
Made in: 1987
Characteristic:
Control system: Sinumerik 810
Length of the table: 7500 mm
Width of ...

Catalog No. : 7463
Type: G80
Producer: Göckel
Made in: 1987
Characteristic:
Length of the table: 3100 mm
Width of the table: 400 mm
Machine height: ...

Catalog No. : 7464
Type: G100
Producer: Göckel
Made in: 1987
Characteristic:
Length of the table: 2500 mm
Width of the table: 600 mm
Machine ...

Catalog No. : 7466
Type: AR61
Producer: Reform
Made in: 1988
Characteristic:
Control system: Simatic
Length of the table: 2500 mm
Width of the ...

Catalog No. : 7363
Type: MCFV 2080 NT
Producer: ZPS
Made in:
Characteristic:
Control system: Heidenhain
Length of the working table: 2200 mm
Width ...