Máquinas usadas: Sheet- and Coil-processing lines

Details
sheet width:130 mm
coil weight:0,150 t
coil internal dia.:300 mm
coil external diameter:1000 mm
dimensions of the machine ca.:0,75 x 1,50 x 1,70 m
volt:230 ...

Details
sheet width:130 mm
coil internal dia.:300 - 500 mm
coil external diameter:1200 mm

Details
material width:75 mm
total power requirement:1,5 kW
dimensions of the machine ca.:1,90 x 1,15 x 1,25 m

Details
material width:300 mm
no. of straightening rolls:13+2+2
straightening roll diameter:60 mm

Details
material width:120 mm
material thickness:0,3 - 2,0 mm
no. of straightening rolls:19
roll diameter:18 mm
speed:0 - 60 m/min
150 kg
band width:120 ...

Details
material width:260 mm
total power requirement:4,5 kW
dimensions of the machine ca.:1,15 x 2,90 x 1,80 m

Laser power: 2kW, table dimensions: 1500x3000mm, connected load: 110kVA, length: 8000mm, width: 5500mm, height: 3000mm, including cooling aggregate, extraction and air filtration unit.

Laser power: 3kW, table dimensions: 1500x3000mm, connected load: 130kVA, length: 11,000mm, width: 6000mm, height: 3000mm, including cooling aggregate, extraction and air filtration unit.

Max. working diameter round/ square/ flat: 30/ 28/ 30mm, length: 550mm, width: 1050mm, height: 1750mm, weight: 700kg.

Ref.Nr.: INNO20956

Ram stroke: 80mm, ram adjustment: 100mm, max. working width: 4750mm, machine needs overhauling.

Ref.Nr.: INNO20803

Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler.

Ref.Nr.: INNO20631

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Ref.Nr.: INNO20562

Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t.

Ref.Nr.: INNO20561

Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t.

Ref.Nr.: INNO20560

Shaft diameter: 145mm, sheet dimensions: 650x1.5mm, without tools.

Ref.Nr.: INNO20341

LQA1250PLC - PLC - controlled combined strip and cross-cut shears of excellent quality for steel sheets up to 1.2 mm thick / ST42. maximum sheet metal strip width 1,250 mm, maximum throughput feed ...

WVR200 - combined electronically controlled roll feed straightening machine with SIEMENS® PLC control - optionally with a decoiler integrated in the PLC, largest sheet width 200 mm (optionally 250 mm ...

EW200 / 3PLC - very high-quality roller feed for strip material up to 200 mm wide and 3 mm sheet thickness / ST42, PLC - control from SIEMENS - feed drive motor from SIEMENS, diameter of the feed ...

Working length: 3050mm, sheet thickness: 10mm.

Ref.Nr.: INNO19853

There are two identical lifting tables available, stroke: 1310mm, load: 7.5t, length: 3000mm, width: 2850mm, height: 430mm, weight: 2.9t.

Ref.Nr.: INNO19824

Including documentation, tools, lubricants and roller tables.

Ref.Nr.: INNO20138

Max. sheet thickness: 120mm, length: 2940mm, width: 3660mm, height: 2670mm.

Ref.Nr.: INNO20017

X-travel: 500mm, y-travel: 275mm, z-travel: 300mm, max. feed rate: 15m/min, max. laser power: 700W, clamping stroke: 4mm, control: HEIDENHAIN TNC 407.

Ref.Nr.: INNO19966

Folding width: 10-13mm, max. pipe length: 3000mm, machine was scarcely used.

Ref.Nr.: INNO19514

Working width: 1030mm.

Ref.Nr.: INNO19512

Pipe diameter: 219mm, nominal width: 3600mm, including preheating oven, Blasting System GIETART GW 1530-425, centrifuge, coating center, drying tunnel, chain conveyor and color filter, operational ...

Double unwinding reel
Load-2 x 1500 kg
Bandwidth 350 mm
Coilausal diameter-up to 1600 mm
Coile inside diameter-360-530 mm
Manualle hydraul. Spread
Pneumat. Pressure ...

Pass width 630 mm
Max. Workpiece cross-section at 40 kg/mm2 tensile strength 4 x 630 mm
Material thickness-0.3-6 mm
Number of straightening rollers 23 pcs, diameter 30 mm

Bottle formats: 0.125/ 0.2/ 0.5/ 0.75l, bottle shape: various, operational hours: ca. 35,000h.

Ref.Nr.: INNO18345

Voltage: 380/ 220V.

Ref.Nr.: INNO19394

Punching force: 500kN, swing: 610mm, stroke: 0-60mm, punching diameter: 30mm, including various tools and roller conveyor.

Ref.Nr.: INNO17191

There are two Knife Shears SCHMITZ available, workpiece dimensions machine 1/ 2: 650x1.5/ 520x1.5mm, including tools and spare drive.

Ref.Nr.: INNO19366

Product dimensions: 609.7x306.2x71mm, output: 1 piece/min, space requirement: 8x14m², controls: SIEMENS, with 12 workstations and 16 workpiece carrier.

Ref.Nr.: INNO11507

Blade length: 3100mm, cutting length: 3050mm, cutting performance: 450-700N/mm², throat depth: 100mm, back gauge: 1000mm, stroke speed: 26-56/min, controls: DAC 350, power: 22kW, length: 3500mm, ...

Blade length: 3100mm, cutting length: 3050mm, cutting performance: 450-700N/mm², throat depth: 100mm, back gauge: 1000mm, stroke speed: 26-56/min, controls: DAC 350, power: 22kW, length: 3500mm, ...

Max. punching force: 250kN, working range: 2000x1000mm, C-axis: 360°, max. sheet thickness: 6.4mm, max. punching diameter: 76.2mm, max. table load: 100kg, weight: 8t.

Ref.Nr.: INNO17674

1.5-10x2000 mm SLITTING LINE r
r
BARBERO, year 1997, but continuelly upgradedr
r
30 tons,r
r
speed 150/200 meters, SIEMENS S5 r
r
LIST OF ...

used cut to lenght line SACMA 1550 X 0,8mm/3,5 mm r
20 ton r
start ad stop r
Still

Trapezoidal CTL line r
used profiler for trapezoidal for roof product

USED COILS cut to lenght LINE FOR TRAPEZOIDAL SHEET

used coils Cut to lenght line 1050 X 0 ,4/3 mm r
with fly shear, striagthner for 19 rollsr
12 ton coils

used slitter line RIZZATO 1600 mm X 0,4/3 mm
30 tons capacity

used coils cut to lenght line 1550 X 1,5/5 mm

used multiblankets coils ctl line 1850 X 3mm